Typically consists of PVC siding used in residential applications. May contain PVC downspouts. Not all siding is PVC and may contain PE variants, which are typically molded. Recyclability and market value increases with additional color segregation.
Product: PVC Bale
Source: Installed or Uninstalled Material
Technical Information: Hardness Level > 65D. Rigid PVC does not contain plasticizer and will typically measure above 65 on the Shore D scale.
Explanation of the Shore Scale: Shore durometer measurement devices can be used to measure the indentation of a prescribed needle into the material. The test method conforms to ASTM D2240.
Contamination:
Prohibitives—Material not accepted at any level, 0% allowed.
a. PET plastic of any form
b. Insulation
c. Medical and hazardous waste
d. Lead or cadmium stabilized rigid PVC materials,
e. Materials containing asbestos fillers or reinforcement.
f. Used household soil or waste plumbing lines with visible bioresidue. (May have debris and paper)
g. CPVC—should be separated and marketed separately—typically includes pipe and molded fittings and runners;
Contamination material allowed at small percentages:
a. Plastics other than PVC such as HDPE, LDPE, PP, PS
b. Foamed PVC
c. Liquids
d. Paper & Cardboard
e. Ferrous and Non-Ferrous Metals
f. Rocks, Stones, Mud, Dirt
g. Wood, Glass, Oils, Grease
Effective as of: July 14th, 2022
Terms & Conditions
Product These guidelines are designed with the potential for dealing with all recycled plastic in bale form. Initial specifications refer only to bottles. The code framework allows for generation of guidelines for all types of plastic packaging materials (including rigids and flexibles) with room for expansion to other plastic products and resins including those which are used to produce durable goods. Guidelines for those products may be added at a later date. Bale Density Bales shall be compressed to a minimum density of 10 pounds per cubic foot and a maximum density to be determined by individual contract between Buyer and Seller. Increased density may improve transportation efficiency, but over-compression may adversely affect the ability of a Buyer to separate, sort, and reprocess the material. Bale Tying Material Bale wires, ties, or straps shall be made of non-rusting or corroding material. Bale Integrity Bale integrity must be maintained through loading, shipping, handling, and storage. Distorted or broken bales are difficult to handle. They are unacceptable and may result in downgrading, rejection, or charge back. Allowable Contamination Unspecified materials must not exceed 2% of total bale weight. Bales which contain over 2% will be subjected to reduction in the contracted price of the material as well as charges for disposal of the contaminants. The reduced percentage will vary depending upon the amount and type of contamination. Quality of the baled plastic is the primary factor which determines the value. Prohibited Material Certain materials are understood to be specified as “prohibited.” Such materials will render the bale “non-specification” and may cause some customers to reject the entire shipment. These may include plastic materials which have a deleterious effect on each other when reprocessed, and materials such as agricultural chemicals, hazardous materials, flammable liquids and/or their containers, and medical waste. Liquids Plastic containers/materials should be empty and dry when baled. The bale should be free of any free-flowing liquid of any type. General Shipments should be essentially free of dirt, mud, stones, grease, glass, and paper. The plastic must not have been damaged by ultraviolet exposure. Every effort should be made to store the material above ground and under cover. A good faith effort on the part of the supplier will be made to include only rinsed bottles which have closures removed.
RELATED SPECS
Flexible PVC
Item Code: Flexible PVC
Description: Typically consists of molding, weather strip- ping, flexible tubing, p...
PP Small Rigid Plastic
Item Code: PP Small Rigid Plastic
Any polypropylene (PP) containers, packaging or products with the ASTM D7611 “#5, PP” resin iden...
Mixed Small Rigid Plastic
Item Code: Mixed Small Rigid Plastic
Small rigid plastic items that are a mix of resins and generated in a positive sort...
Mixed Bulky Rigid Plastic
Item Code: Mixed Bulky Rigid Plastic
Any large rigid polypropylene (PP) high-density polyethylene (PE) and/or Low-Density Polyethylene (L...
PET Bottles With Thermoforms
Item Code: PET Bottles With Thermoforms
Description: Any whole Polyethylene Terephthalate (PET, #1) postconsumer bottle or ...