Punchings or stampings, plate scrap, and bar crops containing not over 0.05 percent phosphorous or sulphur and not over 0.5 percent silicon, free from alloys. All materials cut 12 inches and under, and with the exception of punchings or stampings, at least 1/8 inch in thickness. Punchings or stampings under 6 inches in diameter may be any gauge.
Effective as of: July 14th, 2022
RELATED SPECS
Heavy turnings
Item Code: 251
Short, heavy steel turnings, containing not over 0.05 percent phosphorus or sulphur and free of allo...
Chargeable slab crops
Item Code: 249
Chargeable slab crops for material to be suitable and acceptable to the consumer containing not over...
Silicon bundles
Item Code: 250
Silicon sheet scrap, clippings or skeleton scrap, compressed or hand bundled, to charging box size, ...
Foundry steel, 1 foot and under
Item Code: 243
Same specifications as 2-foot material, except for length.
Low residual, ductile quality shredded clips
Item Code: 243B
Shredded black 1000 series carbon steel scrap, 1/8 inch and over in thickness, minimum average densi...