PE Retail Mix Film

ITEM CODE: PE Retail Mix Film

HTS CODE: 3915100000

Any polyethylene bag and overwrap accepted by retailers from their customers or polyethylene stretch wrap or other film generated back of house may be included. Bags may be mixed color or printed and primarily High-Density Polyethylene (HDPE, #2) but are expected to include other polyethylene bags and LDPE/LLDPE overwrap. Films may be coded with ASTM D7611 resin identification code “#2, HDPE” and #4, LDPE”. All bag bundles should be free of free-flowing liquids.
Product: Mixed Film
Source: Post-Consumer material
Contamination: Total contaminants should not exceed 5% by weight.
• Non-polyethylene other plastics;
• Loose Paper;
• Strapping, twine or tape;
• Liquid residue (2% maximum).

The following contaminants are not allowed at any level (zero percent allowed)
• Medical and hazardous waste;
• Food waste;
• Wood;
• Glass;
• Oils and Grease;
• Rocks, stones, mud, dirt;
• Metallized labels or films;
• Multi-material pouches;
• Silicone coated film;
• Film with oxo or bio-degradable additives;
• PVDC layers;
• Acrylic coatings;

Terms & Definitions

Effective as of: July 14th, 2022

Terms & Conditions

Product These guidelines are designed with the potential for dealing with all recycled plastic in bale form. Initial specifications refer only to bottles. The code framework allows for generation of guidelines for all types of plastic packaging materials (including rigids and flexibles) with room for expansion to other plastic products and resins including those which are used to produce durable goods. Guidelines for those products may be added at a later date. Bale Density Bales shall be compressed to a minimum density of 10 pounds per cubic foot and a maximum density to be determined by individual contract between Buyer and Seller. Increased density may improve transportation efficiency, but over-compression may adversely affect the ability of a Buyer to separate, sort, and reprocess the material. Bale Tying Material Bale wires, ties, or straps shall be made of non-rusting or corroding material. Bale Integrity Bale integrity must be maintained through loading, shipping, handling, and storage. Distorted or broken bales are difficult to handle. They are unacceptable and may result in downgrading, rejection, or charge back. Allowable Contamination Unspecified materials must not exceed 2% of total bale weight. Bales which contain over 2% will be subjected to reduction in the contracted price of the material as well as charges for disposal of the contaminants. The reduced percentage will vary depending upon the amount and type of contamination. Quality of the baled plastic is the primary factor which determines the value. Prohibited Material Certain materials are understood to be specified as “prohibited.” Such materials will render the bale “non-specification” and may cause some customers to reject the entire shipment. These may include plastic materials which have a deleterious effect on each other when reprocessed, and materials such as agricultural chemicals, hazardous materials, flammable liquids and/or their containers, and medical waste. Liquids Plastic containers/materials should be empty and dry when baled. The bale should be free of any free-flowing liquid of any type. General Shipments should be essentially free of dirt, mud, stones, grease, glass, and paper. The plastic must not have been damaged by ultraviolet exposure. Every effort should be made to store the material above ground and under cover. A good faith effort on the part of the supplier will be made to include only rinsed bottles which have closures removed.


LDPE Colored Film

Item Code: LDPE Colored Film

Any mixture of natural translucent Low Density Polyethylene (LDPE, #4) film and mixed color transluc...

Read More

PE Clear Mix

Item Code: PE Clear Mix

Any mix of natural polyethylene, High-Density Polyethylene (HDPE, #2), Low Density Polyethylene (LDP...

Read More

LDPE Furniture Mix

Item Code: LDPE Furniture Mix

Any mixture of natural Low Density Polyethylene (LDPE, #4) film used for sofa overwrap, bubble wrap...

Read More

Agricultural Greenhouse Film

Item Code: Agricultural Greenhouse Film

Films not used on the ground for agriculture or farming. Examples of which may be bale wrap, green...

Read More

3-7 Bottles & ALL Other Rigid Plastic

Item Code: 3-7 Bottles & ALL Other Rigid Plastic

Rigid plastic items generated in a positive sort from a curbside, drop-off, or other public or priva...

Read More